Aluminium windows in Pakistan are priced per square foot. In 2026, most standard sliding and casement windows cost roughly Rs. 1,200 to Rs. 3,500 per square foot, while double glazed, thermal break and imported-profile windows can reach Rs. 3,500 to Rs. 6,000 or more per square foot. The exact price depends on the aluminium section, glass, window type, finish, size and your city.
These figures are market estimates, not fixed rates. Aluminium and glass prices change often, and suppliers in Lahore, Islamabad, Rawalpindi, Karachi, Faisalabad and other cities quote differently, so always ask for a written quote based on your own measurements.
Aluminium Window Price Per Square Foot in Pakistan
Here is an approximate guide to what different types of aluminium windows cost in Pakistan today:
- Sliding aluminium windows: about Rs. 1,200 to Rs. 2,500 per sq ft. This is the most common and usually the most budget-friendly type for Pakistani homes.
- Casement (openable) windows: about Rs. 1,400 to Rs. 3,000 per sq ft. They open outward or inward on hinges and give better ventilation, so they usually cost a little more than sliding windows.
- Fixed glass windows: about Rs. 900 to Rs. 2,000 per sq ft. They do not open and are mainly used for light and appearance, for example on staircases and large openings.
- Double glazed aluminium windows: about Rs. 2,500 to Rs. 5,000 per sq ft. Two layers of glass with a sealed gap reduce heat and noise.
- Thermal break or premium imported systems: about Rs. 3,500 to Rs. 6,000 or more per sq ft. These are used where better insulation and a high-end finish are needed.
- Folding and tilt-and-turn windows: about Rs. 4,000 to Rs. 6,500 or more per sq ft because of the extra hardware.
Published rates in Pakistan vary a lot. Some suppliers quote basic local sections with thin profiles, while others quote heavier or imported systems, which is why you may see very different numbers online. Use this list as a guide and compare quotes only when the specifications are the same.
How to Calculate the Price of Your Window
Aluminium windows are priced by area, so the method is simple:
Price = width (ft) × height (ft) × rate per square foot
For example:
- A 4 × 4 ft window is 16 sq ft. At Rs. 1,500 per sq ft it costs about Rs. 24,000, and at Rs. 2,500 per sq ft about Rs. 40,000.
- A 5 × 5 ft window is 25 sq ft. At Rs. 1,500 per sq ft it costs about Rs. 37,500, and at Rs. 2,500 per sq ft about Rs. 62,500.
These examples are only to show the calculation. Your final price depends on the specification you choose. Always confirm whether the rate includes glass, hardware, installation and transport.
What Affects the Price of Aluminium Windows in Pakistan?
Aluminium profile quality and thickness
Thicker, stronger sections cost more than thin ones. Local sections are usually cheaper, while imported or heavy-duty systems are more expensive but give better strength and finish.
Type of glass
Single glass is the cheapest. Tinted, tempered, laminated, double glazed and Low-E glass raise the cost. For large windows and safety areas, tempered glass is often the better choice.
Window type and design
Sliding windows are generally the most economical. Casement, folding and tilt-and-turn windows need more hardware and cost more.
Finish and colour
Powder-coated, anodised and wood-effect finishes can change the price. Standard colours such as white, black, grey and brown are common choices.
Hardware and locks
Good rollers, handles, weather strips and locks affect how smoothly the window works and how long it lasts, and they add to the price.
Size and custom work
Very large or non-standard sizes need custom fabrication, which can increase the cost per square foot.
Installation, transport and location
Labour, transport and demand differ from city to city. Sites that are far from the workshop or hard to reach can cost more to install.
Aluminium and glass market rates
The price of raw aluminium and glass changes with the market, so the same window can cost a little different from one month to the next.
Aluminium Window Prices in Lahore, Islamabad, Karachi and Other Cities
The basic rate is similar across major cities such as Lahore, Islamabad, Rawalpindi, Karachi, Faisalabad, Multan, Gujranwala and Peshawar. The difference usually comes from transport, labour, the brand of aluminium and the specification you choose. In premium housing societies such as DHA, Bahria Town and Gulberg, many owners choose heavier profiles, double glazing and better finishes, which raises the total cost. The best way to know the real price in your city is to get a quote after your windows are measured.
Single Glazed vs Double Glazed Windows: Price Difference
Single glazed windows are the most affordable and suit most standard rooms. Double glazed windows cost more because they use two panes and a sealed unit, but they help reduce heat, outside noise and dust. If your home is on a busy road, or you want a quieter, cooler bedroom or office, the extra cost is often worth it.
Aluminium vs UPVC Windows: Which Costs Less?
Both are popular in Pakistan. Standard aluminium windows are often more affordable, and they suit large openings and slim frames. UPVC windows usually cost more, but they offer good insulation and low maintenance. The right choice depends on your budget, window size and the look you want.
How to Get an Accurate Quote and Avoid Mistakes
- Share exact sizes. Send width and height of each window, or ask for a site measurement.
- Ask for the specification in writing. It should mention profile thickness, glass type and thickness, hardware and finish.
- Check what is included. Confirm glass, locks, installation and transport.
- Compare like with like. A cheaper quote may be using thinner aluminium or basic glass.
- Ask for the colour and finish. Powder coating and colour options can change the price.
- Look at previous work. Photos of finished projects show the quality of fabrication and installation.
About Us: Aluminium Windows, Doors and Glass Work in Pakistan
aluminumwindowdesign.com provides aluminium windows, doors, glass partitions, glass railings and custom fabrication for homes, offices and shops. We are based at Kacha Jail Road, Ferozepur Road, Lahore, and we take projects in Lahore, Islamabad, Rawalpindi, Karachi, Faisalabad and other cities of Pakistan depending on the project size and location.
Our team handles measurement, design, fabrication and installation, so you deal with one company from start to finish. Send us your window sizes or a photo of your project on WhatsApp and we will prepare a clear quote for your home or office.
Call or WhatsApp: +92 344 9170348
Frequently Asked Questions About Aluminium Window Price in Pakistan
What is the price of aluminium windows per square foot in Pakistan?
In 2026, most standard aluminium windows cost roughly Rs. 1,200 to Rs. 3,500 per square foot. Double glazed, thermal break and imported systems cost more, often Rs. 3,500 to Rs. 6,000 or above. The final rate depends on the profile, glass, finish and your city.
How much does a 4×4 aluminium window cost in Pakistan?
A 4 × 4 ft window is 16 square feet. At Rs. 1,500 to Rs. 2,500 per square foot, it costs roughly Rs. 24,000 to Rs. 40,000. Double glazing, a premium finish or heavy-duty profile will increase this.
Which is cheaper, sliding or casement aluminium windows?
Sliding windows are usually cheaper because they need simpler hardware. Casement windows open outward or inward and usually cost more, but they allow more airflow.
How much extra does double glazing cost?
Double glazed windows commonly cost more than single glazed ones, and the difference depends on the glass thickness, the sealed gap and the frame system. Ask for both options in your quote so you can compare.
Does the window rate include installation?
Not always. Some suppliers quote only the window, while others include glass, hardware and installation. Always ask for a written quote that clearly states what is included.
Why do aluminium window quotes differ so much between suppliers?
Quotes differ because of the thickness and brand of the aluminium, glass type, hardware, finishing and installation quality. A very low price often means a thinner profile or basic glass, so compare the specification, not just the rate.
Do aluminium window prices change from city to city?
The base rate is similar in cities like Lahore, Islamabad, Karachi and Faisalabad, but transport, labour, brand availability and the chosen specification can change the final price.
How can I get an accurate price for my home?
Share your window sizes, type of window, glass choice and city, or ask for a site visit and measurement. A quote based on exact measurements is the only reliable way to know your cost.
